Vigitron UTP Transmitter-Combiner with 12 Vdc Converter

Ideal for a wide variety of security and surveillance applications

• Combines video and power into a single RJ-45 4-pair cable
• Up to 3,000 ft. (930 m) with Vigitron Active Receiver Hubs
• Up to 750 ft. (225 m) with Vigitron Passive Receiver Hubs
• Built-in passive transceiver
• Built-in surge protection for video
• Support for "up-the-coax" type signals
• 60 dB cross talk and noise immunity
• Compact size and easy installation
• Designed for structured wiring applications
• Limited lifetime warranty

The Vi1054VP is a passive video transmitter (non-amplified) device that includes a 24 Vac to 12 Vdc converter to power cameras for distances up to 3,000 feet (930 m) over a single Cat-5 cable. Its compact size makes it easy to be mounted directly in the back cameras for a variety of applications. The power distribution from the control room over UTP will be 24 or 28 VAC. The Vi1054VP makes it possible to use 12 Vdc cameras in a 24 Vac power system.

For shorter runs, it can be used with Vigitron Vi1200 or Vi1500 series combiner-receivers. While longer distances can be achieved by using it with Vi1300 or Vi1400 series combiners and Vigitron active UTP receivers. It connects to cat-5 cable via its RJ-45 connector and its 12 Vdcpower output is available on a 9 in. pigtail wire.

The Vi1054VP has built-in surge suppression to protect video equipment against damaging voltage spikes. Its exceptional noise immunity ensures quality video signals. The Vi1054VP is an ideal CCTV component for a structured cabling environment.